Radiation-Emitting Household Appliances

Leave blank for all. Otherwise, the first selected term will be the default instead of "Any".

Radiation-Emitting Household Appliances

Do TV screens emit radiation?

In addressing this issue one must distinguish between different types of TV screens.  The new generations of flat TV screens (LCD or LED) typically consume little energy, and the level of exposure to radiation emitted by them is significantly lower than that of the old type.


flat TV screen

flat TV screen 

Vintage TV

Vintage TV


The guiding principle in discussing exposure to non-ionizing radiation is the precautionary principle, which calls for taking simple measures to reduce exposure to the minimal  level necessary for efficient and safe use of the given technology, in particular by increasing the distance between the body and the source of radiation .


TV screens based on the old technology consume a relatively high energy electric current, so that they produce magnetic fields of relatively high power in their immediate vicinity.  With the new types of screen, the level of exposure to non-ionizing radiation is relatively low, and does not exceed the above recommendation.  Conversely, with the older type of screen, one should maintain a certain distance from the screen, based on the principle outlined above.


A Table showing strengths of exposure to magnetic fields from electrical household appliances may be found on the website of the Ministry for Environmental Protection (Hebrew).


If a level of radiation higher than the permitted one is suspected, it may be measured by authorized inspectors specialized in ELF radiation. These experts are listed on the website of the Ministry for Environmental Protection (Hebrew).


Are there recommendations regarding the use and placement of electromagnetic radiation-emitting devices during sleep?

The level of exposure to non-ionizing radiation decreases significantly with the distance between the human body and the source of radiation.  Therefore, it is recommended not to place radiation-emitting devices that have a fixed location (such as routers, mobile phone chargers, supports for cordless phones) in rooms where one spends many hours, such as bedrooms.  If there are electrical and other appliances in the bedroom (such as TV, computer, adjustable bed) they should be placed as far as possible from the bed and/or switched off /disconnected during sleep.



Are there recommendations regarding the use of Wi-Fi networks in private homes?

In general, the level of radiation measured during the use of Wi-Fi is low.  The maximal transmission output of a typical cordless home router is about 100 milli-watts, and at a distance of 1 meter from it the level is only about 1 micro-watts/cm2.  This level is only 1% of the recommended threshold in Israel for exposure to transmission at the recognized frequency for the Wi-Fi network.  Modern forms of routers and mobile phones emit levels lower than this, and may drop to a level of 20 milli-watts.


When using laptops or mobile phones connected to the Wi-Fi network, the individual exposure to radiation emitted by the device is greater, because of its proximity to the body: at a distance of 30 cm the maximal exposure is about 9 micro-watts/cm2.  This is an exposure additional to that emitted by the cordless router.  In general, the recommended threshold value for exposure to any source of transmission at Wi-Fi frequency is 100 micro-watts/cm2, in accordance with the recommendations of the Ministry of Health and the Ministry of Environmental Protection.


As mentioned under placement of devices during sleep, it is best not to place the cordless router in the bedroom near the bed, or in any room where one spends many hours consecutively near the device.  It is also possible to disconnect the transmission from the router while the Wi-Fi network is not in use, such as at night.





At home, is it preferable to use a cordless phone rather than a mobile phone? Does the cordless phone emit more radiation when not resting on its support?

The home cordless phone transmits signals to its base in order to route a conversation outwards, thus emitting non-ionizing radiation.  In general, cordless phones have a significantly lower output than that of mobile phones.  Since the distance between the phone and its support is relatively small, there is no need for a high intensity of transmission, and the level of radiation is consequently low.


When the handset is not placed in its base and not in call mode, the emitted radiofrequency radiation is relatively low (compared to during a conversation). There are some models where the transmitters are switched off during the non-call mode, thus not emitting any radiation until a call is initiated.


When the phone is placed in its base, the radiofrequency communication channel is usually disconnected and therefore does not emit any radiofrequency radiation, but there are some devices that do not disconnect the communication channel in this mode.


It may thus be concluded that in general, the level of radiation emitted by cordless phones is lower than that from mobile phones.


It should be noted that the newer cellular networks adapt the emitted radiation to the location of the device and to the technological profile of the network.  Therefore, the mobile phone may adapt the intensity to the lowest possible level of radiation, so that the radiation emitted by the mobile phone may in fact be lower than that of the home cordless phone.





Is there a risk of exposure to radiation from the home desktop computer?

The desktop computer is a source of two types of non-ionizing radiation exposure:

  1. Extremely low frequency (ELF) emitted from the computer as an electric device.
  2. Radiofrequency radiation (RF) emitted from the wireless router when the computer is connected to a WiFi network.

Both types of radiation – ELF from the electric grid and RF from the wireless router have been classified by the World Health Organization as possibly carcinogenic to humans (category 2B).


Radiation from the electric grid:

Electricity is supplied to a desktop computer through the power supply from the electric grid. The computer board and the computer's various components operate by a direct current at low voltage. The computer's transformer converts the high electric voltage from the electric grid to low voltage. The electric currents of the transformer create a relatively strong magnetic field, usually a few tens of milligauss, in its close vicinity (a few tens of centimeters up to one meter). The magnetic field intensity decreases rapidly with distance, to a background level of the typical magnetic field in the home (in an average home the level of exposure is about 1 milligauss).


It is recommended that the user should be situated at least 50 cm from the computer's power supply.


Regarding RF radiation from the wireless router, the answer can be found under "Are there recommendations relating to the use of Wi-Fi networks in private homes?"



How can a microwave oven be used safely?


Microwave ovens heat and cook food by microwave radiation that causes food molecules, and especially water molecules, to rotate thereby generating heat. When the microwave oven's door is closed, the oven's chamber becomes a Faraday cage (a closed chamber that is impenetrable to electric fields, named after the physicist Michael Faraday). The microwave oven door is made of glass but is shielded by an iron screen, preventing radiation from escaping the closed chamber.


As long as the microwave oven is undamaged, that is, the microwave oven door is sealed, closes correctly and there are no holes in the door's screen, it is safe to use the oven and remain in its vicinity.


If there is concern that the microwave oven is faulty. For example, if the door is not sealed, there is a hole in the door's iron screen or in the oven's chamber, it is recommended not to use it.


When the microwave oven is operating it is recommended, as a safety precaution, to be at a distance of 50-100 cm from it.


A Ministry of Environmental Protection-authorized radiofrequency inspector can check the intactness of the microwave oven. For your convenience a list of approved inspectors for conducting measurements of non-ionizing radiation may be found in the following link: